MYSWEETY
MYSWEETY
 
 
 
 
 
Advertencia: Debido a restricciones aduaneras, no podemos importar airbag, perfumes, maquillaje, cremas para la piel, alimentos, suplementos alimenticios ni remedios. Si el producto que estás cotizando no es ninguno de los mencionados, procede con la compra y continúas con la compra, si el producto es uno de los mencionados continúas con la compra realizaremos la devolución del dinero.

Los Aparatos Eléctricos podrían necesitar transformador 110/220 voltios.
Aereo
Marca: MYSWEETY
Código producto: B01MXLXRTY
Disponibilidad: 1
 
 
 
 
- Make sure this fitsby entering your model number. - Package include: 1 x 2.2KW Spindle Motor, 1 x 2.2KW VFD, 1 x 75W Water Pump, 1 x 5M Water Pipes, 1 x 80mm Spindle, 13 x ER20 Collet, 1 x 70mm Brush, 10 x Drill Bits. - Runout off: less than 0.001mm, voltage: 220V, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz. - The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. - 13PCS ER20 Collet Set Gripping Range:(1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm). - 100% satisfactory, if you have any problem, please contact us, we will help your money back. 1.Spindle Motor: Size: 80mm Power: 2200W Voltage: 220V Frequency: 0-400Hz Speed: 0-24000rpm Water Cooling ER11 collet Runout off: less than 0.001mm Germany SKS 4pcs bearing Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT Grease Lubrication Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were connected to the inverter power supply (U, V, W), 4 connected inverter ground2.Inverter: Type: 2.2KW/220V Input: 220VAC/50Hz Output: 0-220VAC 3-phase Frequency: 0-400Hz Size: 168x124x161mm3.ER20 Collet Set: Gripping Range: 1MM to 13MM (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm) Run-out tolerance 0.01mm (0.0006")4.Water Pump: Voltage: 220V Structure: Single-stage Pump Pressure: High Pressure Application: Submersible Usage: Water5.5M Water Pipes: Length: 5M Can be connected between Water Pump and Spindle Motor6.Spindle Motor Clamp Mount: Diameter: 80mm Material: Aluminum,Surface sandblasted Application: Wood working industry rourter, such as wood door milling engraving and cutting, furniture producingPackage include: 1 x 2.2KW Spindle Motor 1 x 2.2KW VFD 1 x 75W Water Pump 1 x 5M Water Pipes 1 x 80mm Spindle Clamp (Free 3pcs screws) 13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)1 x 70mm Brush 10 x Drill BitsHow to connect: The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.

TÉRMINOS Y CONDICIONES

- Los precios siempre pueden variar sin previo aviso.

- Es responsabilidad del cliente la selección de la talla y color del producto comprado. No se aceptan cambios luego de realizada la compra.

- Los Aparatos Eléctricos podrían necesitar transformador 110/220 voltios.

- Los productos podrían requerir ensamblaje, el cual no esta incluido.

- La compra esta siempre sujeta a aprobación del cliente y disponibilidad del proveedor.

- Las fotos de los productos son referenciales.

Specials